75KW 34-58m³/min aeration blower for Pneumatic Transmission in Food Processing Industry
Introduction
The screw blower is derived from the screw compressor and belongs to the rotary blower as well as roots blower. Although the development of the research of screw blower started late, but because of its characteristics of internal compression, compared with roots blower the screw blower is more stable, energy saving, and with higher efficiency, so in many areas it has been gradually replacing the roots blower.
The screw blower belongs to the positive displacement blower. Through a pair of meshing rotors, it rotates at a high speed in the opposite direction and uses the periodic change of the volume between the teeth to realize gas compression and transport to the pipe network.
The air volume of the screw blower is generally not more than 100m3/min, and the air volume can be adjusted between 20-100m3/min through the control of the speed of the frequency conversion system. It is suitable for the occasions with small flow demand, with excellent cost performance ratio in terms of stability within the interval, operating cost and maintenance.
If the load needs constant flow effect, suitable for screw blower.The screw blower belongs to the constant flow fan, the main working parameter is the air volume.The air volume transported is proportional to its revolution. Under the condition of a certain revolution, the output pressure can change with the change of pipeline and load, while when the pressure changes, the air volume changes very little.
Features
Intelligent Control
-
Real-time obtain the operation information
-
Monitor power consumption and loading/unloading characteristics
-
Reset-able the parameters according to the demand of air management
-
Display and view the preset status of each parameter
-
Check history records and display maintenance warning
Use Data.
Instead of just telling you how good our products are, it's better to use data to demonstrate the features of our products.
For one set of 37KW single screw air blower, air flow 25m³/min, under the frequency operation in the best energy-saving mode, the electricity consumption is 290000 degree for 8000 hours in a whole year.
While one set of 55KW roots blower, air flow 24.04m³/min, under operation at full load for a year about 8000 hours, the electricity consumption is 440000 degree.
Cost saving is the absolute principle for every company.
For one year: the single screw blower saves 150000 degrees of electricity which means saving electricity charge of 120,000 yuan for a company,
Reliable, energy saving, environmental protection.
Our Vision
GooDSeaA strives to be the R&D leader and products&solution provider in the field of civil turbo machinery, and committed to be the leader company in the field of aviation energy power technology and levitation bearing technology.
Parameters of Positive-displacement Oil-free Screw Air Blower
| MODEL | POWER
KW | PRESSURE
kPa | AIR FLOW
M3/min | OUTLET
CONNECTION | DIMENSION
L*W*Hmm | WEIGHT
Kg |
| LG22-04 | 22 | 40 | 25 | DN150 | 2100*1100*1600 | 2000 |
| LG22-06 | 60 | 16 |
| LG22-08 | 80 | 15 |
| LG30-06 | 30 | 60 | 25 | DN150 | 2100*1100*1600 | 2200 |
| LG30-08 | 80 | 21 |
| LG30-10 | 100 | 15 |
| LG37-04 | 37 | 40 | 36 | DN150 | 2300*1300*1900 | 2300 |
| LG37-08 | 80 | 25 |
| LG37-10 | 100 | 21 |
| LG37-12 | 120 | 16 |
| LG37-15 | 150 | 15 |
| LG45-06 | 45 | 60 | 36 | DN150 | 2300*1300*2000 | 2500 |
| LG45-10 | 100 | 25 |
| LG45-12 | 120 | 24 |
| LG55-04 | 55 | 40 | 58 | DN200 | 3000*1700*2300 | 2900 |
| LG55-06 | 60 | 43 |
| LG55-15 | 150 | 24 | DN150 |
| LG75-06 | 75 | 60 | 58 | DN200 | 3000*1700*2300 | 3300 |
| LG75-08 | 80 | 49 |
| LG75-10 | 100 | 42 |
| LG75-12 | 120 | 34 |
| LG90-04 | 90 | 40 | 89 | DN250 | 3000*1900*2400 | 4300 |
| LG90-06 | 60 | 76 |
| LG90-08 | 80 | 58 |
| LG90-10 | 100 | 56 |
| LG90-12 | 120 | 47 |
| LG90-15 | 150 | 34 | DN200 | 3000*1700*2300 | 3600 |
| LG110-04 | 110 | 40 | 98 | DN300 | 3000*1900*2400 | 4400 |
| LG110-06 | 60 | 88 |
| LG110-08 | 80 | 75 |
| LG110-10 | 100 | 64 |
| LG110-12 | 120 | 56 | DN250 |
| LG110-15 | 150 | 48 | DN200 | 3000*1700*2300 | 3700 |
| LG132-08 | 132 | 80 | 88 | DN300 | 3000*1900*2400 | 4500 |
| LG132-10 | 100 | 75 |
| LG132-12 | 120 | 64 |
| LG132-15 | 150 | 56 | DN250 | 3000*1700*2300 | 3800 |
| LG160-12 | 160 | 120 | 86 | DN300 | 3000*1900*2400 | 4600 |
| LG160-15 | 150 | 63 |
| LG180-12 | 180 | 120 | 90 | DN300 | 3000*1900*2400 | 4700 |
| LG180-15 | 150 | 73 |
| Remarks 1. Above Design Parameters are obtained based on below conditions: We assume the inlet volume flow is defined as the standard of 20℃ suction temperature and 1atm 2. We reserve the right to update the referred contents. Some parameters can be changed according to the actual needs. Please refer to the pre-sale service |
Package & Delivery
Our usual way of packing is in bubble wrap. Meanwhile wooden case packing is also available upon request, but additional fees should be charged accordingly.
Product Tags:
|
|
75KW Stable Rotary Screw Blower Aeration Blowers Wastewater For Pneumatic Transmission Images
|
